Philips HTS3260/12 Manuale Utente
14
Play audio from TV or other
devices
Press AUDIO SOURCE repeatedly to select the
audio output of the connected device.
Play from an MP3 player
Connect and play audio files from an MP3 player
or other external audio devices.
1
Connect the MP3 player to the home
theater.
2
Press AUDIO SOURCE repeatedly until
‘MP3 LINK’ appears on the display panel.
3
Press the buttons on the MP3 player to
select and play audio files.
Play a musical slideshow
Play music and pictures simultaneously to create
a musical slideshow.
1
Select a music track, then press OK.
2
Press (Back) and go to the picture folder.
3
Select a picture, then press OK to start
slideshow.
4
Press to stop slideshow.
5
Press again to stop music.
Play from radio
The home theater can store up to 40 radio
stations.
1
Check that the FM antenna is connected.
2
Press RADIO.
»
“AUTO INSTALL...PRESS PLAY’ appears
on the display panel if you have not
installed any radio stations. Press (Play).
3
Press the following buttons to control play:
Button
Action
/
Selects a preset radio station.
Navigation
buttons
(left/right)
Searches for a radio station.
Navigation
buttons
(up/down)
Fine tunes a radio frequency.
Press and hold to erase the preset
radio station.
Press to stop the installation of
radio stations.
(Options)
Manual: Press once to access
program mode, and press again to
store the radio station.
Automatic: Press and hold for five
seconds to reinstall radio stations.
AUDIO
Toggles between stereo and mono
sound.
Note
•
AM and digital radio are not supported.
•
If no stereo signal is detected, or if fewer than
five stations are found, you are prompted to
install the radio stations again.
•
For the best reception, place the antenna away
from the TV or other sources of radiation.
EN