Philips HTS3260/12 Manuale Utente

16

Note

 

•

For settings related to HDMI, the TV must be 

connected through HDMI.

 

•

Night mode is available for Dolby encoded 

DVD and Blu-ray discs (for models support 

Blu-ray playback).

Set up network

1

  Press   (Home).

2

  Select [Setup], then press OK.

3

  Select [Network], then press OK.

4

  Select and adjust the following settings:

• 

[Network Installation] : Starts 

wired (Ethernet) setup. Follow the 

instructions to set up the network 

connection.

• 

[View Network Settings] : Displays 

the current network settings.

5

  Press OK to confirm your choice.

Set up EasyLink

1

  Press   (Home).

2

  Select [Setup], then press OK.

3

  Select [EasyLink], then press OK.

4

  Select and adjust the following settings: 

• 

[EasyLink] : Enables or disables EasyLink.

• 

[One Touch Play] : Enables or disables 

One Touch Play.
If enabled, you can use the remote 

control to start disc play in the 

home theater and the TV switches 

automatically to the correct channel.

• 

[One Touch Standby] : Enables or 

disables One Touch Standby.
If enabled, the home theater can 

be switched off to standby by a 

remote control from the TV or other 

connected HDMI CEC devices.

• 

[System Audio Control] : Enables or 

disables System audio control.
If enabled, follow the instructions on 

the TV to map the connected devices 

correctly to the audio connectors of 

the home theater. The home theater 

switches automatically to the audio 

source of the connected device.

Change video settings

1

  Press   (Home).

2

  Select [Setup], then press OK.

3

  Select [Video], then press OK.

4

  Select and adjust the following settings:

• 

[TV Display] : Selects a picture display 

format to fit the TV screen.

• 

[HDMI Video] : Selects the HDMI 

video resolution.

• 

[HDMI Deep Color] : Displays colors 

with more shades and hues when 

the video content is recorded in 

Deep Color and the TV supports this 

feature.

• 

[Blu-ray 3D video] : Selects the 

3-dimensional video output when you 

play a 3D video on your home theater. 

The home theater must be connected 

to a 3D TV through HDMI.

• 

[Picture Settings] : Selects a 

predefined color setting.

5

  Press OK to confirm your choice.

Note

 

•

The best setting is automatically selected for 

the TV. If you need to change the setting, 

ensure that the TV supports the new setting.

 

•

For settings related to HDMI, the TV must be 

connected through HDMI.

Change audio settings

1

  Press   (Home).

2

  Select [Setup], then press OK.

3

  Select [Audio], then press OK. 

4

  Select and adjust the following settings:

• 

[Night Mode] : Selects quiet or full 

dynamic sound. Night mode decreases 

the volume of loud sounds and 

increases the volume of soft sounds 

such as speech.

• 

[HDMI Audio] : Selects HDMI audio 

format or disables HDMI audio output 

for the TV.

5

  Press OK to confirm your choice.

EN