Lexmark w812 Guida Utente
32
Install memory, firmware, or option cards
Reinstalling the system
board access panel
Follow these instructions to reinstall the
printer system board access cover and
panel.
printer system board access cover and
panel.
1
Insert the metal tab on the bottom
of the access panel behind the
printer frame, and then secure the
panel with the screws.
of the access panel behind the
printer frame, and then secure the
panel with the screws.
2
Insert the two tabs at the front of
the right cover behind the printer
frame, and then align the back of
the cover.
the right cover behind the printer
frame, and then align the back of
the cover.
3
Slide the right cover forward.
Be sure the cover securely
engages with the printer frame.
engages with the printer frame.
4
Close the top cover.
If you installed a firmware card in your
printer, see the following section for
information about applying the Option
Added label.
printer, see the following section for
information about applying the Option
Added label.