Lexmark w812 Guida Utente
38
Verify printer setup
Note:
For more information
about using the operator panel
and changing menu settings,
refer to the Publications CD.
and changing menu settings,
refer to the Publications CD.
5
Verify that the paper trays are configured for the sizes and
types of paper you loaded.
types of paper you loaded.
6
If you attached your printer to a network, continue with “Printing
a network setup page” on page 38.
a network setup page” on page 38.
Printing a network
setup page
If the printer is attached to a network, print a network setup page to
verify the network connection. This page also provides important
information that helps you configure for network printing.
verify the network connection. This page also provides important
information that helps you configure for network printing.
Note:
If an optional MarkNet
print server is installed, you see
Print Net1 Setup on the display.
Print Net1 Setup on the display.
1
Press
Menu
until you see Utilities Menu, and then press
Select
.
2
Press
Menu
until you see Print Net Setup, and then press
Select
. The network setup page prints and the printer returns to
Ready
status.
3
Check the first section on the network setup page and confirm
that Status is “Connected.”
that Status is “Connected.”
If Status is “Not Connected,” your LAN drop may not be active
or your network cable may be malfunctioning. Consult your
network support person for a solution, and then print another
network setup page to verify the connection to your network.
or your network cable may be malfunctioning. Consult your
network support person for a solution, and then print another
network setup page to verify the connection to your network.
Save the network setup page for later use.
What do I do next?
Task
Go to page…