Siemens sl785 Guida Utente

Pagina di 80
35
Operating the answering machine on the Gigaset SL785 base station
Gigaset SL785 / USA en / A31008-M2009-R301-4-6019 / answering_m.fm / 14.02.2011
V
e
rsion 4, 16.0
9
.2005
Operating the answering 
machine on the 
Gigaset SL785 base 
station
You can access the answering machine using 
the handset or by remote operation (from 
another telephone/mobile phone). You can 
record your own announcement or advisory 
message using the handset.
Answering machine mode
You can use the answering machine in two 
different modes. 
u
In Answer & Record mode, the caller 
hears the announcement and can then 
leave a message. 
u
In Answer only mode, the caller hears 
your announcement but cannot leave a 
message.
Using the handset
The handset loudspeaker activates auto-
matically
 if you receive an acoustic prompt 
or message while operating. You can switch 
it off with the Handsfree key 
d.
Activating/deactivating and 
setting the answering machine 
mode
You can choose between Answer & Record
Answer only and Alternating. By using the 
Alternating setting, you can activate the 
answer and record mode for a set period; 
outside this period the caller will hear the 
advisory message.
v 
¢
Ì 
¢
Activation (
μ= on)
§Edit§
Press the Display key.
¤
You can enter data in the following fields:
Activation:
Select On or Off to activate/deactivate 
the answering machine.
Mode:
Select Answer & RecordAnswer only or 
Alternating.
If the Alternating mode is selected:
Record from:
Using 4-digit format, enter hours/min-
utes for the start of the period. 
(The time must be set on the phone 
beforehand.)
Record until:
Using 4-digit format, enter hours/min-
utes for the end of the period.
§Save§
Press the Display key.
When you switch the answering machine 
on, the remaining memory time is 
announced. If the time has not yet been set, 
an appropriate announcement is made (Set 
time 
Ã
 icon appears in 
the display.
The phone is supplied with prerecorded 
announcements for the answer and record 
mode and for answer-only mode. If a per-
sonal announcement has not been 
recorded, the relevant prerecorded 
announcement is used. 
If the message memory is full and 
Activation: On has been selected, saving is 
interrupted, and you will receive an instruc-
tion to delete old messages.
Recording a personal 
announcement/advisory message
v 
¢
Ì 
¢
Announcements 
¢
Record Announcemnt. Record 
Advisory Msg.
§OK§
Press the Display key to start the 
recording.
You hear the ready tone (short tone).
¤
Now say your announcement (at least 3 
secs.).
§End§
 
Press the Display key to end the 
recording.
Cancel recording with 
a or 
§Back§
. Restart 
the recording with 
§OK§
.