Xerox 4118 Guida Utente

¾

Click the [Apply] button to implement any changes.

NOTE: Click the [Undo] button to cancel any changes made and return to the 
previous values.

¾

Select the [Status] tab and then select [Reset Network Controller] to enable the selection 
to take effect.

Use these instructions to check the configuration settings of the WorkCentre 4118.

To check the configuration, perform these steps:

¾

Enable CentreWare Internet Services (see “Enabling Internet Services” on page 10-4).

¾

At the CentreWare Internet Services Home Page for the WorkCentre 4118, select the 
[Properties] tab.

¾

Select the plus symbol [+] to the left of the General Setup folder in the Properties frame. 

¾

In the Properties frame, within the General Setup folder, select [Configuration].

The lower pane will show the firmware versions.

Click [Print System Data List] to print this report.

¾

In the upper pane, click the link for the settings that you want to check.