Xerox 4118 Guida Utente

Insert the CD containing the WorkCentre 4118 drivers and select [Have Disk].

Browse to the required Windows XP driver on the CD and select [OK].

NOTE: The driver will be found in the Drivers>Print folder on the CD in the 
appropriate PCL or PostScript (PS) folder. For PostScript, you will need to choose 
the required language. The driver is identified by the file extension .inf. 

Select [Next], and select [Next] again and the WorkCentre 4118 driver will be loaded onto 
the workstation.

Enter the Printer Name and select [Next].

¾

 If you wish to share the printer over the network select [Shared]. You may also wish to 
install printer drivers for other operating systems that will access the printer.

A 

dialog 

box displays with a message regarding the printing of a test page.

Select [Finish] to accept the Yes choice.

¾

Continue with Test Print on page 4-14.

NOTE: Windows 2000 supports printing via TCP/IP as standard when TCP/IP is 
installed on a Windows 2000 Workstation.

Use the Add Printer Wizard to add the WorkCentre 4118 to the network.

¾

Select [Start], select [Settings], and then select [Printers].

Double-click on the [Add Printer] icon to display the Add Printer Wizard.

¾

Select [Local Printer], uncheck the box labelled [Automatically detect and install my Plug 
and Play printer.] and then select [Next] to display the dialog box listing available ports.

¾

Select [Create a new port] to display the Printer Ports dialog box.

Select [Standard TCP/IP Port] and select [Next] to display the Add Standard TCP/IP Port 
dialog box.

Enter the IP Address of the printer in the [Name or address of printer] field (you can 
optionally enter a friendly name for the printer port you are creating or use the default 
name created). Then select [Next] to continue.