Xerox 4118 Guida Utente

Use these instructions to setup HTTP using CentreWare Internet Services.

NOTE: The HTTP settings for the device will have been setup when completing the 
Enabling CentreWare Internet Services section.

To complete the installation of the device, perform these steps:

¾

Enable CentreWare Internet Services (see “Enabling Internet Services” on page 7-5).

¾

At the CentreWare Internet Services Home Page for the WorkCentre 4118, select the 
[Properties] tab.

¾

Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame, and 
then select the [+] symbol to the left of the Protocol folder. 

¾

Check the

 HTTP Configuration details are correct. If necessary.

Enter the [Keep Alive Timeout] in seconds from 5 to 99.

Enter the [Maximum Connections] from 5 

to 32.

¾

Click the [Apply] button to implement any changes.

NOTE: Click the [Undo] button to cancel any changes made and return to the 
previous values.

¾

Select the [Status] tab and then select [Reset Network Controller] to enable the selections 
to take effect.

¾

Continue with Test Print.