Standard Horizon cp390i Guida Utente

Page 68

CP390i and CPF390i

The CP390i and the CPF390i have the capability to store 50 Routes with 100 Waypoints
or Marks in each Route. A Route can consist of Waypoints or Marks. The difference is when
a Route is made using Waypoints and the Route is deleted the Waypoints are also deleted.
However if a Route is made of Marks and the Route is deleted the Marks stay in memory.

Figure 9 - Example to show how the GPS Chart Plotter switches from one Waypoint to another

1. On the Chart page move the ShuttlePoint knob to the Lat/Lon of the starting Waypoint

in the Route.

2. Press [ROUTE], you will notice the starting Waypoint 

 will be placed under the

cursor.

3. Move the ShuttlePoint knob to the second Lat/Lon of the next leg 

 in the Route.

4. Press [ROUTE]. You will notice another Waypoint is shown under the cursor and a line

joins the starting Waypoint to the second Waypoint.

Figure 9.0 - Creating a Route using Waypoints

5. Repeat steps 3 and 4 until all Waypoints are entered into the Route.

At this point the Route is saved as ROUTE01. If you would like to save the Route under a specific
name follow the next steps.