Standard Horizon cp390i Guida Utente

CP390i and CPF390i

Page 69

To name the Route:
1. Press  [MENU], move the ShuttlePoint knob to highlight USER POINTS and press

[ENT].

2. Move the ShuttlePoint knob to highlight ROUTE and press [ENT].
3. Move the ShuttlePoint knob to highlight EDIT and press [ENT] or move the ShuttlePoint

knob to the right.

4. Move the ShuttlePoint knob to highlight NAME and press [ENT]. A popup window will

be shown.

5. Move the ShuttlePoint knob up/down to change the characters and left/right to select

a different character in the Routes Name.

Figure 9.1 - Edit Route (Route Report)

6. When finished press [ENT] to save.
7. Press [CLR] to show the Chart page.

This feature allows the starting point in a Route to be saved as the final destination point.
1. On the Chart page move the ShuttlePoint knob to the Lat/Lon of the starting Waypoint

in the Route.

2. Press [ROUTE], the starting Waypoint will be placed under the cursor.
3. Move the ShuttlePoint knob to the second Lat/Lon of the next leg in the Route.
4. Press  [ROUTE]. Another Waypoint is shown under the cursor and a line joins the

starting Waypoint to the second Waypoint.

5. Repeat steps 3 and 4 until all Waypoints are entered into the Route.
6. Then move the ShuttlePoint knob to the last Waypoint.

Figure 9.2 - Olympic Route creation (1)

7. Press [O

]. A line joins the starting Waypoint and the last Waypoint.