Cisco Headend Digital Broadband Delivery System Guida Utente
13-6
Program Recording Options
4002178 Rev C
Show VCR Commander Options
Introduction
The VCR Commander Menu option lets you specify whether all set-tops or only
specific set-tops can show VCR Commander options on the General Settings menu.
Select one of the following options:
•
•
Addressable means that only specific set-tops can show the VCR Commander
options on the General Settings menu
•
Global means that all set-tops can show the VCR Commander options on the
General Settings menu.
Note: Because the VCR Commander service is not required to record programs on
the DVR, this service is not supported on DVR equipped Explorer set-tops.
Recommended Setting
Allow only specific set-tops to show the VCR Commander options on the General
Settings menu. Choose the Addressable setting.
Showing VCR Commander Options
To specify whether all set-tops or only specific set-tops are able to show VCR
Commander options on the General Settings menu, complete the following steps.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Select Global.
Result: The Set Up Global DHCT Configuration window opens.
Result: The Set Up Global DHCT Configuration window opens.
4.
Select the General Settings tab.
Result: The General Settings tab appears in the forefront.
Result: The General Settings tab appears in the forefront.
5.
For the VCR Commander Menu Option field, select one of the following
options:
•
•
Addressable means that only specific set-tops can show the VCR
Commander options on the General Settings menu. To use the
addressable setting, you need to define a VCR commander package or use
an existing package to authorize the VCR Commander feature.
•
Global means that all set-tops can show and hide the VCR Commander
General Settings options.
6.
Click Save.
Result: The VCR Commander options appear on the General Settings menu
Result: The VCR Commander options appear on the General Settings menu
of the selected set-tops.
7.
Click Cancel.
Result: The DHCT Configure prompt opens.
Result: The DHCT Configure prompt opens.
8.
Click File and Close to close the DHCT Configure prompt.