Cisco Headend Digital Broadband Delivery System Guida Utente
13-8
Program Recording Options
4002178 Rev C
Allow Subscribers to Record a Currently Tuned Program
Introduction
The Has Record option allows subscribers to record a currently tuned program using
the Quick Settings menu on the set-top. Depending upon the type of Explorer set-top
the subscriber is using, the Quick Settings menu option for recording programs will
behave slightly different. When the subscriber selects Start Recording Now on the
Quick Settings menu, the set-tops behave as follows:
•
•
A set-top equipped with a VCR Commander, displays the Recording Alert screen.
•
A set-top equipped with a DVR, displays a Confirm Recording screen.
Recommended Setting
Enable this option to allow subscribers to record the currently tuned program from
the Quick Settings menu.
Recording a Currently Tuned Program
To allow subscribers to record a currently tuned program, complete the following
steps.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Select Global.
Result: The Set Up Global DHCT Configuration window opens.
Result: The Set Up Global DHCT Configuration window opens.
4.
Select the Quick Settings tab.
Result: The Quick Settings tab appears in the forefront.
Result: The Quick Settings tab appears in the forefront.
5.
Make sure the option for Has Record is selected.
Result: Subscribers can record the currently tuned program by selecting this
Result: Subscribers can record the currently tuned program by selecting this
option from the Quick Settings menu.
Note: If this field is not enabled, the Quick Settings menu does not contain an
Note: If this field is not enabled, the Quick Settings menu does not contain an
option to record the current program.
6.
Click Save.
Result: The Quick Settings menu displays the option to record a program.
Result: The Quick Settings menu displays the option to record a program.
7.
Click Cancel.
Result: The DHCT Configure prompt opens.
Result: The DHCT Configure prompt opens.
8.
Click File and Close to close the DHCT Configure prompt.