Cisco Headend Digital Broadband Delivery System
Chapter 2 Upgrading the Software
12
4002628 Rev B
5 Type more goqamdata and press Enter. A result, similar to the following output,
appears.
6 Did more than one config file appear?
If yes, keep the xterm window open and go to step 7.
If no, go to Checking the Software Version Associated with the config File
(on page 12).
(on page 12).
7 Do you need to continue to run different versions of GoQAM software on some
GoQAMs in your network?
If yes, refer to Load Multiple Versions of GoQAM Code (on page 33).
If no, go to step 8.
8 Update the GoQAMs to use the same config file by performing the following
steps:
a From the DNCS Administrative Console, click Element Provisioning and
a From the DNCS Administrative Console, click Element Provisioning and
click QAM. The QAM List window opens.
b Select the GoQAM, click File and select Open. The Set Up GoQAM window
opens.
c Click Advanced Parameters and modify the configuration file, as needed.
9 Go to Checking the Software Version Associated with the config File (on page