Samsung SHR-6160P Manuale Utente
22_
connecting with other device
connecting with other device
CONNECTING THE RS-485 DEVICE
Connect the RS-485 device through the back port.
For example, you can connect and control the PTZ
camera which supports the RS-485
communication.
camera which supports the RS-485
communication.
Transfer Type : You may select either Half Duplex or Full
Duplex as the data transfer type.
Duplex as the data transfer type.
Baud Rate : Supported Baud rates are 600/1200/2400/
4800/9600/19200/38400.
4800/9600/19200/38400.
Check if the RS-485 device is compatible with the
product fi rst.
product fi rst.
Pay attention not to change the polarity (+/-) of the
RS-485 device when connecting it.
RS-485 device when connecting it.
Depending on camera’s type, connection polarity can be
different.
For further information, refer to the respective PTZ
Camera’s documentation.
different.
For further information, refer to the respective PTZ
Camera’s documentation.
Ex : DVR(TX+/-)
↔ SCC-C6433,35(RX+/-)
DVR(TX+/-)
↔ SCC-C6403,07(TX+/-)
M
•
•
M
PTZ device
Half Duplex Type
Data
(–)
Data
(+)
Full Duplex Type
Rx(+)
Rx(–)
Tx(–)
Tx(+)
Rear
Tx(–)
Tx(+)
Rx(–)
Rx(+)