Hitachi VM-H835LA Manuale Utente

Playback 

 

37

2. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to 
VIDEO. 
3. Press the PLAY button and enjoy your video. 
4. Press the STOP button when finished. 

Using Still 

To view a still picture during playback press the Start/Stop. Press the Start/Stop button 
again to resume playback. If you leave the camcorder in play/pause mode for more than 
5 minutes the camcorder automatically stops the cassette to prevent damage to the 
tape. 
You can view a still picture with less noise on the LCD monitor. 

 

Note: The still picture will have several noise bars in the viewfinder and on the TV, but this 
does not indicate a fault. 
Note: If you are freezing a picture with the LCD monitor closed, then you will not be able to 
view a still picture with less noise when you open the monitor. 

 

Using Forward and Reverse Search 

When looking for a particular point in your videotape use the F.FWD button and 
REW/REVIEW button to find the spot quickly. 

When the LCD monitor is closed: 
• Press F.FWD button during playback to play the tape forward at approximately 9 times 
normal speed. Press PLAY button to return to normal playback. 
• Press REW/REVIEW button during playback to play the tape backwards at 
approximately 7 times normal speed. Press PLAY button to return to normal playback.