Meridian Audio 541 Manuale Utente

Communication is not working
between the surround controller and
other Meridian products

❍ Check that all products are interconnected using the correct

comms leads.

❍ If the installation includes 200 Series or 600 Series units,

check that all 500 Series units are set to 200 mode.

The sound is not clear

❍ If speech sounds muffled in a system with a centre

loudspeaker check that sound is coming from the centre, as

there may be a connection problem.

❍ If speech sounds muffled in a system with no centre

loudspeaker you may have selected a layout that expects one;

The picture quality is poor

❍ Check that you are using suitable quality cables with good

connectors.

❍ Check that there is not a ground-loop between any of the

components connected to the 541.

Remember that reception of broadcast or cable signals can be

significantly degraded by cross-modulation in the RF domain. It

is unwise to attempt to cascade and mix several video sources

(eg LaserDisc, VCR, etc) to an antenna system.

There are problems using the SCART
connectors

❍ Check that the SCART leads you are using have the correct

❍ Check that you are not making the connections to both the

SCART and phono connectors.

❍ If the TV is not displaying a picture check that the TV is

switched to the AV input, or Function Select is working.

❍ If you are watching an RGB source your TV may need to be

switched away from it, or the RGB source turned off.

There is no on-screen display (OSD)

❍ Check that you are feeding a composite video signal on either

SCART or phono for the current source.