e-pil medtime Manuale Utente
Filling and Programming Med-Time
Fill compartments (28 available) with pills using the dosage
template as a guide (1, 2, 3 or 4 times per day).
Note: If you take pills three times per day, one compartment
will be left empty.
template as a guide (1, 2, 3 or 4 times per day).
Note: If you take pills three times per day, one compartment
will be left empty.
The first dose scheduled to be
dispensed after Med-Time is
programmed is placed to the
right of the lock.
When Med-Time alarms, the
tray will turn clockwise making
the pills availble through the
opening. Turn Med-Time over
to dispense pills into your hand.
dispensed after Med-Time is
programmed is placed to the
right of the lock.
When Med-Time alarms, the
tray will turn clockwise making
the pills availble through the
opening. Turn Med-Time over
to dispense pills into your hand.
Doctor
Dosering
PRESCRIPTION
Natt
Midd
Morg
Kväll
Styrka
Medicin
Namn:
Write the dosage(s) on
the Prescription card and
insert it under under Med-
Time.
the Prescription card and
insert it under under Med-
Time.
4
Setting of Clock and Alarm times
(Instructions also available on inside of Med-Time Lid)
Setting the Clock
1. Press and hold button 1 for a few seconds (until the
1. Press and hold button 1 for a few seconds (until the
symbol : blinks) and then release.
2. Set the correct time by pressing buttons 2 (hours) and 3
(minutes).
3. Store clock time by pressing button 1.
If buttons 2 or 3 are held/depressed, time display progresses
automatically.
If one lets the display continue to blink in the setting mode it
will automatically return to normal function after
approximately one minute.
If buttons 2 or 3 are held/depressed, time display progresses
automatically.
If one lets the display continue to blink in the setting mode it
will automatically return to normal function after
approximately one minute.
Setting and checking the alarm times
1. Press button 1 and then release. The Alarm 1 symbol will
1. Press button 1 and then release. The Alarm 1 symbol will
begin to blink. To set alarm time # 1, press buttons 2
(hours) and 3 (minutes). If you wish to cancel the alarm,
press button 2 until --:-- is displayed, which occurs after
23:00 or 11:00 p.m.
(hours) and 3 (minutes). If you wish to cancel the alarm,
press button 2 until --:-- is displayed, which occurs after
23:00 or 11:00 p.m.
2. After you have programmed the correct alarm time, press
button 1 again to store the alarm time and to advance to the
next Alarm setting.
next Alarm setting.
3. The Alarm 2 symbol will blink. To set alarm time 2, use
buttons 2 & 3.
4. Continue as above to set Alarm settings 3 and 4.
5. End by pressing button 1 until the ALARM symbols cease
5. End by pressing button 1 until the ALARM symbols cease
to blink.
If button 2 or 3 are held depressed time display progresses automatically. If
one lets the display continue to blink in the setting mode it will
automatically return to normal function after approximately one minute.
one lets the display continue to blink in the setting mode it will
automatically return to normal function after approximately one minute.
12/24-hour time formats
Med-Time automatically defaults to a 24 hour time format (Military time). To
switch to a 12 hour format, press buttons 2 and 3 simultaneously. The AM or PM
symbol will appear on the right side of the display when the clock is in the 12 hour
time format. Release the buttons when the desired time format is displayed
switch to a 12 hour format, press buttons 2 and 3 simultaneously. The AM or PM
symbol will appear on the right side of the display when the clock is in the 12 hour
time format. Release the buttons when the desired time format is displayed
5