KYOCERA Finecam L30 Guida Utente
Using Setup “SET UP” Mode Functions
59
SET UP
[POWER SAVE] Saving Power by Turning Power Off
Automatically
Automatically
This camera is equipped with an Auto Power-off function that automatically turns the
power off after several minutes if the camera is left on without any operation being
performed. This function helps to reduce power consumption if you forget to turn off
the camera. You can select the length of time before power is turned off.
power off after several minutes if the camera is left on without any operation being
performed. This function helps to reduce power consumption if you forget to turn off
the camera. You can select the length of time before power is turned off.
Operation — setting to [1MIN.]
1
1
Turn on the power and set the mode select dial to “SET UP”.
<Note regarding camera used in the “
/
” mode:>
When using the camera in the “
/
” mode, the auto power-off setting will cause the
camera to respond as follows:
When [POWER SAVE] is set to one of [1MIN], [3MIN] and [6MIN]:
With this setting, if the camera is left inactive for more than the specified period of time, it will
automatically enter the sleep mode for two minutes, after which the power will turn off.
During the two-minute power-save sleep period, the camera can be quickly restored to its
original shooting mode by depressing the shutter button halfway, or by pressing one of the other
function buttons.
After the two minutes have expired, the camera power will automatically turn off.
When [POWER SAVE] is set to one of [1MIN], [3MIN] and [6MIN]:
With this setting, if the camera is left inactive for more than the specified period of time, it will
automatically enter the sleep mode for two minutes, after which the power will turn off.
During the two-minute power-save sleep period, the camera can be quickly restored to its
original shooting mode by depressing the shutter button halfway, or by pressing one of the other
function buttons.
After the two minutes have expired, the camera power will automatically turn off.
[1MIN.]
The power will be turned off automatically if the camera is left
inactive for more than 1 minute, 3 minutes, or 6 minutes.
inactive for more than 1 minute, 3 minutes, or 6 minutes.
[3MIN.]
[6MIN.]
*In the Playback mode or the Set Up mode, the power is automatically turned off after 1
minute.
minute.
2
Press
or
button to select [POWER SAVE],
then press
button.
3
Press
or
button to select the length of time
before power is turned off, then press the
button to complete the setting.