Mitel Deutschland GmbH 68635RFP36U-01 Manuale Utente
SIP-DECT OM System Manual
252
7.9.3 PARAMETER SETTINGS PRIORITY
Some parameters can be set via DHCP / OM Configurator or by using the files “ipdect.cfg” or
“<MAC>.cfg”. If a parameter is provided through more than one of the possible ways, the last setting has
priority. There is the following order:
“<MAC>.cfg”. If a parameter is provided through more than one of the possible ways, the last setting has
priority. There is the following order:
•
DHCP / OM Configurator
•
ipdect.cfg
•
<MAC>.cfg
It is also possible to remove settings.
7.9.4 SOFTWARE UPDATE SETTINGS FOR 3
RD
GENERATION RFPS
A configuration parameter specifies the location of the software that will be installed into the flash of an
RFP 35/36/37 IP / RFP 43 WLAN and activated by the OpenMobility Manager.
RFP 35/36/37 IP / RFP 43 WLAN and activated by the OpenMobility Manager.
OM_SwImageUrl=ftp://172.30.207.21/openmobility/iprfp3G.dnld
TFTP, FTP(S), HTTP(S) are supported for an RFP 35/36/37 IP / RFP 43 WLAN software update.
7.9.5 TIMES WHEN RFP CONFIGURATION TIMES ARE READ
The configuration files are read by the RFP application e.g. during startup as shown in the following
figure.
figure.