Omnitron iConverter XGT+ 8589N-1-D Manuale Utente
Codici prodotto
8589N-1-D
iConverter
iConverter
®
■ 10GBASE-T Ethernet Media Converter
■
Copper to Fiber interfaces:
RJ-45 to XFP or RJ-45 to SFP+
■
Copper to Copper interfaces:
RJ-45 to CX4
■ IEEE 802.3an Compliant
■ Supports CWDM, DWDM and tunable DWDM fiber
transceivers
■ Supports MSA power level 4 XFP transceivers
■ Supports up to 100m over CAT-6A and CAT-7
■ Short Reach mode (up to 30m) reduces power and
cooling requirements per IEEE 802.3az Energy Efficient
Ethernet (EEE)
■ Built-in loopback for installation verification and
troubleshooting
■ Link fault detection modes facilitate quick fault detection,
isolation and reporting
■ LED displays for immediate visual status of each port
■ Omnitron transceivers support XFP and SFP+ digital
diagnostics reporting via LEDs or management module
■ Standalone and high-density chassis plug-in modules
■ Management of the plug-in module is available with the
addition of a management module to the chassis
■ Provides management of wavelength tunable XFP
transceivers, compliant with MSA SFF-8477 and INF-
8077i
■ SNMP management via NetOutlook
®
provides
monitoring, configuration and fault notification
■ 3 Year Warranty and free 24/7 Technical Support
The iConverter XGT+ is a 10 Gigabit Ethernet media converter
with one 10GBASE-T RJ-45 port and one pluggable transceiver
port that provides copper-to-fiber and copper-to-copper media
conversion. Copper-to-fiber conversion is achieved with XFP
or SFP+ fiber transceivers. Copper-to-copper conversion is
achieved with a CX4 XFP transceiver.
The iConverter XGT+ provides a variety of 10G data center
The iConverter XGT+ provides a variety of 10G data center
connectivity solutions, including resolving interface disparities
between equipment with 10GBASE-T RJ-45 ports and
existing rack servers or switches with fiber optic or CX4 ports.
Architecture changes such as migrating from Top of Rack to
End of Row can present cabling challenges when extending
network distances from racks of servers. The XGT+ converts
short-reach cabling to multimode fiber, single-mode fiber or
CAT-6A cabling (up to 100 meters) to extend distances to
servers, switches and patch panels. For CAT-6A cabling links
less than 30 meters, the XGT+ supports 10GBASE-T Short
Reach mode. In this mode, the device conserves energy by
reducing power and cooling requirements.
The iConverter XGT+ also supports CWDM and DWDM
The iConverter XGT+ also supports CWDM and DWDM
transceivers to convert 10GBASE-T interfaces to WDM
wavelengths. This enables connecting equipment with
10GBASE-T interfaces to iConverter CWDM multiplexers that
expand fiber capacity and transport multiple 10G data channels
across existing fiber links.
The XGT+ supports high-power (power level 4) XFP
The XGT+ supports high-power (power level 4) XFP
transceivers and the latest generation of wavelength tunable
DWDM XFP transceivers. The wavelength of a tunable
transceiver can be programmed and saved, eliminating the
need for external programming equipment.
Built-in loopback functions, on-board status LEDs and link
Built-in loopback functions, on-board status LEDs and link
fault propagation modes facilitate easy setup and quick
troubleshooting.
The iConverter XGT+ is available as a compact, unmanaged
The iConverter XGT+ is available as a compact, unmanaged
standalone unit, or chassis plug-in module that can be
managed with a management module installed in the chassis.
The hot-swappable, plug-in modules can be mounted in a
variety of chassis with AC and DC power supplies.
The standalone iConverter XGT+ has built-in mounting
The standalone iConverter XGT+ has built-in mounting
brackets. It is DC powered and available with an external
AC/DC power adapter, or a terminal connector for wiring
directly to a DC power source.
SFP+/XFPs not included
Key Features
iConverter
XGT+
10GBASE-T Ethernet Media Converter