Toshiba IK-TF7P2 Manuale Utente
25
SYNC
( 6 )
When an external sync signal is input, the display menu changes from INT (internal sync) to EXT (external sync)
automatically.
automatically.
• H PHASE adjustment -100 to 100
• Sync system display
MODE EXT
H PHASE 0
H PHASE 0
SYNC
Move up down
by pushing
MENU UP, DOWN
Select the desired
value by pushing
DATA UP, DOWN
Adjusting horizontal phase
(6. 1)
Move the “
aa
” to H PHASE by pushing [MENU UP], [MENU DOWN] buttons.
Adjust the horizontal phase by pushing [DATA UP], [DATA DOWN] buttons.
aa
OPTION
( 7 )
Changing serial communication baud rate
(7. 1)
Move the “
aa
” to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons.
Select either 9600 or 19200 by pushing [DATA UP], [DATA DOWN] buttons.
aa
• Serial baud rate setting 9600, 19200
Communication speed setting.
Set the speed to the baud rate setting
on the personal computer side.
Set the speed to the baud rate setting
on the personal computer side.
BAUD RATE
9600
OPTION
Move up down
by pushing
MENU UP, DOWN
Select the desired
value by pushing
DATA UP, DOWN
Returning to factory settings
( 8 )
All the settings can be returned to the factory default status (preset status).
(1) If characters are displayed on the screen, press the [DISP] button to disable the character display.
(2) Push [MENU DOWN] and [DATA DOWN] buttons simultaneously for approx. 1 second.
(3) The preset operation starts. When the preset operation finishes, the character PRESET OK is displayed for
(1) If characters are displayed on the screen, press the [DISP] button to disable the character display.
(2) Push [MENU DOWN] and [DATA DOWN] buttons simultaneously for approx. 1 second.
(3) The preset operation starts. When the preset operation finishes, the character PRESET OK is displayed for
approx. 1 second.
120730c1_IK_TF7P2_EN.indd 25
12.7.30 1:19:03 PM