TP-LINK TL-WDR4900 Manuale Utente

 

- 98 - 



 

Interface - This interface tells you either the Destination IP Address is on the LAN & WLAN 

(internal wired and wireless networks), or on the 

WAN (Internet). 

 

Figure 4-95 Bandwidth Control 

There are two submenus under the Bandwidth Control menu as shown in Figure 4-95: 

Settings and Rules List. Click any of them, and you will be able to configure the corresponding 
function. The detailed explanations for each submenu are provided below. 

Choose menu “

Bandwidth Control →  Control Settings”,  and then you can configure the 

Egress Bandwidth and Ingress Bandwidth in the next screen. Their values you configure should 
be less than 100000Kbps. For optimal control of the bandwidth, please select the right Line Type 
and ask your ISP for the total bandwidth of the egress and ingress.

 

 

Figure 4-96 Bandwidth Control Settings 



 

Enable Bandwidth Control - Check this box so that the Bandwidth Control settings can take 
effect.



 

Line Type - Select the right type for you network connection. If you don’t know how to choose, 
please ask your ISP for the information.



 

Egress Bandwidth - The upload speed through the Internet port

.



 

Ingress Bandwidth - The download speed through the Internet port. 

Choose menu “

Bandwidth Control →  Rules List”,  and then you can view and configure the 

Bandwidth Control rules in the screen below.