Avaya 3616 For SRP Manuale Utente

To remove the Battery Pack, press down on the latch on 
the Battery Pack on the back of the Wireless Telephone. 
The Battery Pack releases outward. 

To replace the Battery Pack, slide the lip of the Battery 
Pack into the bottom of the cavity. Push the top of the 
Battery Pack until it snaps into place. You should not have 
to force it against the Wireless Telephone. 

The Battery Pack may be changed while the call is still in 
progress. If you are using the NetLink Telephony Gateway 
in your telephone system, do not press 

 on the Wireless Telephone. Quickly remove the 

discharged Battery Pack and replace with a charged 
Battery Pack, then press 

to turn the 

Wireless Telephone back on. Press 

again to

resume the call in progress. Users of IP telephony 

interfaces not requiring the NetLink Telephony Gateway 
should Park a call prior to changing the Battery Pack 
during an active call. The call should then be retrieved 
after the Battery Pack is replaced to rejoin the 
conversation. Check with the switch administrator for 
instruction on how to perform this or a similar process on 
your particular telephone system. 

 
 

 

Page 16 

     555-301-719 
              Issue 2