Avaya 3616 For SRP Manuale Utente

  The Avaya Desktop Charger is designed to charge the 

Nickel Metal Hydride (NiMH) Battery Packs. Full 
charging is accomplished in approximately one an a half 
hours. Chargers operate in a 50° to 85° F (10° to 30° C) 
environment. Do not expose them to freezing temperatures 
or direct sunlight. 

  The Desktop Charger is shipped with the appropriate 

power supply for the site’s location. Place the Desktop 
Charger on a flat, horizontal surface. Plug the power 
supply into the Desktop Charger and into an appropriate 
wall outlet. 

Do not place anything in the Desktop Charger other than 
the Wireless Telephone. You might damage the contacts. 
Bent contacts can keep the Wireless Telephone from 
charging. 

  The user must end any call in progress by pressing the 

 button on the Wireless Telephone 

before placing the handset into the Desktop Charger. The 
Wireless Telephone may be off or in standby mode during 
charging. 

Place the Avaya 3616 Wireless Telephone into the 
Desktop Charger slot facing forward. If the Wireless 
Telephone is placed correctly, the red indicator light will 
come on. The indicator light will not come on when the 
slot is empty, when the Avaya 3616 Wireless Telephone is 
improperly seated, or when the Desktop Charger has no 
power applied. 

If the Wireless Telephone is in standby mode, it will 
display its extension number and 

. If the 

Wireless Telephone is turned off, only 

 will 

display. The dots will be racing during the charging cycle. 
It is normal for the Battery Pack to become warm when 
charging. 

When the Wireless Telephone is fully charged, 

 will display. The indicator light will remain on 

until the Wireless Telephone is removed. 

555-301-719  

Page 

17 

Issue 2