Avaya Media Gateway G700 Manuale Utente

2. The type field is automatically populated with LSP. LSP appears in the field if the node 

name is not associated with ESS. 

3. Enter a network region for the LSP. The default is 1. However, there may be a different 

network region better suited for the LSP to provide media gateway and IP phone support. 

Skip to 

on page 532.

In this case, the S8300 you have installed is configured as an LSP.

CAUTION:

This administration applies only to the primary controller that controls the S8300 
LSP that you are installing. The primary controller can be an S8400, S8500, or 
S8700-series Media Server. Do not administer the S8300 LSP. Translations are 
automatically copied to the LSP from the primary controller.

Skip this section and go to 

primary controller is an S8300.

Note:

Some of the procedures in this section may have been completed previously as 
part of a normal media server installation.

This document covers only the administration of Communication Manager required for the 
G700 media gateway to communicate with the primary controller over a customer’s network. 
For the majority of required administration, see Administrator Guide to Avaya Communication 
Manager, 03-300509, or Administration for Network Connectivity for Avaya Communication 
Manager, 555-233-504.

add survivable-processor sv-mg2-lsp

Page   1 of  xx 

 

SURVIVABLE PROCESSOR - PROCESSOR ETHERNET

 

Node Name: sv-mg2-lsp

IP Address: 128.256.173.101

Type: LSP

Network Region: 1