Avaya Media Gateway G700 Manuale Utente

In this section, you will use the SAT interface on the primary controller to:

●

●

●

●

●

Note:

For information on installing the CLAN boards on the S8400, S8500, or 
S8700-series port networks and complete information on installing an S8400, 
S8500, or S8700-series Media Server, see the Installation documentation on the 
Documentation for Avaya Communication Manager, Media Gateways and 
Servers CD, 03-300151.

Note:

The CLAN boards must be TN799DP running version 5 or greater firmware. Be 
sure to check the firmware version for these boards on the media server. For 
information on how to upgrade the firmware on the S8400, S8500 or 
S8700-series Media Server, please see the "Upgrading firmware on 
programmable TN circuit packs," in Upgrading, Migrating, and Converting Avaya 
Media Servers and Gateways, 03-300412.

Note:

At the SAT prompt, type change node-names ip to open the Node Names 
screen. 

1. Enter the name and IP address for the C-LANs and LSPs.

2. Press F3 (Enter) when complete.

change node-names ip

Page 1 of 1

                           

IP NODE NAMES

Name              IP Address          Name                IP Address

default_________

0__.0__.0__.0__ _______________

___.___.___.___

node-1-clan

 __  192.168.1 _.124 

_______________    ___.___.___.___

node-2-clan 192.168.1 _.97_

_______________    ___.___.___.___

node-10-lsp

192.168.1 _.50_

_______________    ___.___.___.___

node-11-lsp

192.168.1 _.51_

_______________    ___.___.___.___

__________ 

___.___.___.  _

_______________    ___.___.___.___

__________ 

___.___.___.  _

_______________    ___.___.___.___

__________ 

___.___.___.  _

_______________    ___.___.___.___