Avaya Media Gateway G700 Manuale Utente

1. On the Maintenance Web Interface, under Diagnostics click Ping.

2. Enter the IP address where the Linux-Migration backup file is stored. 

3. Click Execute Ping. 

If the ping is successful, continue with restoring the system files. Otherwise, check the IP 
address and connectivity to the server.

CAUTION:

The software service pack may or may not be call-preserving.

Note:

Skip this procedure if there is no Communication Manager service pack file to 
install.

This service pack may or may not be call preserving. 

Use a telnet session to install the service pack file.

1. Click Start > Run to open the Run dialog box.

2. Access the server’s command line interface using an SSH client, like PuTTY, and an IP 

address of 192.11.13.6.

3. Log in as craft.

4. Type cd /var/home/ftp/pub and press Enter to access the pub directory.

5. At the prompt, type ls -ltr and press Enter to list files in the pub directory.

The media server displays a list of files in the FTP directory. Verify that the directory 
contains the Communication Manager .tar.gz file you have uploaded, if any.

6. Type update_unpack update.tar.gz, where update is the release or issue number of 

the latest software update file. (For example, 03.0.640.4-xxxx.tar.gz). Press Enter. 

7. Type update_show and press Enter to list Communication Manager files to verify the new 

software update file was unpacked.

8. Type update_activate update, where update is the release or issue number of the 

latest software update file. (For example, 00.0.339.4-xxxx. Do not use the .tar.gz 
extension at the end of the file name). Press Enter.

Enter y response to the question, Commit this software?

The media server may reboot (reset system 4). If it reboots, it also may display the message

/opt/ecs/sbin/drestart 2 4 command failed.