Bestop Car Seat 39331 Manuale Utente

8mm Flat Washer,
Qty - 4

M8-1.25 x 35mm Bolt, Qty - 4

5/16-18 x 1 1/4" Bolt, Qty - 4

Seat, Qty - 1

Note: Before beginning the seat installation, set the
parking brake, place the vehicle in gear or park and
chock the wheels to reduce the risk of the vehicle
unexpectedly moving, which could result in seri-
ous injury.

Installation Instruction
Manual, Qty - 1

Adjustable Wrench  or

1/2" Wrench

13mm Wrench

Lock Down
Bracket, Lt.,
Qty - 1

Floor Mounting
Bracket, Rt.,Qty - 1

Cotter Pin, Qty - 2

Lock Down
Bracket, Rt.,
Qty - 1

Note: Use only the Bestop hardware
provided in the kit.

Floor Mounting
Bracket, Lt., Qty - 1

Before you begin installing this seat, please read all installa-
tion instructions and warnings thoroughly.

This seat is designed to be used on the model vehicles
described above. Use of this seat on any other vehicle or
failure to install this seat properly may result in an improperly
mounted seat and could result in unexpected movement of
the seat and loss of control of the vehicle, thereby placing the
occupants of the vehicle and others in a potentially danger-
ous situation.

This seat system is intended to be used with seat belts at all
times. Do not rely on the seat to maintain the seating position
of occupants, in the event of an accident.

Read and follow, precisely, all installation instructions pro-
vided when installing this product. Failure to do so may result
in a poor fit and could place occupants of the vehicle in a
potentially dangerous situation.

Jeep® is a registered trademark of Chrysler and
Bestop is not affiliated with Chrysler Corporation.