Bestop Car Seat 39331 Manuale Utente

Floor Mounting
Brackets

Cutout toward
front

Floor Mounting Bracket -
Place over existing holes

M8-1.25 x 35mm
Bolts and Flat
Washers

Locate the Floor Mounting Bracket mounting holes on the floor of
the vehicle behind the front seat risers. Orient the Floor Mounting
Brackets with the cutout toward the front of the vehicle and align
the holes in the Floor Mounting Brackets with the holes in the
vehicle. Install two (2) M8-1.25 x 35mm Bolts and two (2) Flat
Washers in each bracket. Securely Tighten the bolts.

If your vehicle has carpet covering the floor, cut the carpet so that the Floor Mounting Brackets are installed flush on the metal floor. If the Floor Mounting
Brackets are not flush mounted, the seatback may not lock in place, which could result in serious injury to you and others.

Orient the Lock Down Brackets with the opening and the
curved slot toward the rear of the vehicle. Align the lower
mounting hole and the curved slot with the holes in the side of
the vehicle tub, just behind the seat belt mount.

Install each bracket using two (2) 5/16-18 x 1-1/4 Bolts.
Loosely tighten the bolts.

If your vehicle has carpet covering the floor, cut the carpet so that the Floor Mounting Brackets are installed flush on the metal floor. If the Floor Mounting
Brackets are not flush mounted, the seatback may not lock in place, which could result in serious injury to you and others.

Lock Down Bracket -
Place over existing holes

Opening toward
Rear

15/16-18 x 1-1/4 Bolts

Seat Belt
Mount

Lock Down
Brackets