Focus Enhancements DR-HD100 Manuale Utente
Quickstart
27
Record With the DR-HD100
There are four modes of recording with the DR-HD100.
•
Manual Recording
Control with the DR-HD100 transport buttons.
•
JVC GY-HD
This recording mode is tailored for use with the companion,
JVC, GY-HD100/101. Set the JVC GY-HD100/101
camcorder’s
1394 REC TRIGGER
to
SYNCRO
,
SPLIT
, or
SERIES
to enable control of the DR-HD100.
•
Syncro Slave
Use this mode with camcorders that do not have DR-HD100
compatible external control or tapeless trigger functionality.
In this mode, the DR-HD100 watches the record status of the
camcorder and replicates its actions. A tape must be in the
camcorder for this mode to function.
•
External
Control recording with other camcorders that have
DR-HD100 compatible external control or tapeless trigger
capabilities.
Before beginning recording, verify that:
1. Time and date are set.
2. Recording format is set.
3. The DR-HD100 is connected to the video camera according
2. Recording format is set.
3. The DR-HD100 is connected to the video camera according
to the explanation in “Connecting a DR-HD100 to a DV/HD
Camcorder” on page 21.
Camcorder” on page 21.
4. Camera and DR-HD100 are powered on.
5. Tape is loaded in the camera.
5. Tape is loaded in the camera.
External Control
If the camcorder supports an external control function, then tapeless
recording is possible. Otherwise, the DR-HD100 control panel keys
must be used to control recording in LOCAL control mode when there
is no tape in the camcorder.
recording is possible. Otherwise, the DR-HD100 control panel keys
must be used to control recording in LOCAL control mode when there
is no tape in the camcorder.
For a list of compatible camcorders, go to Focus Enhancements
website at http://www.focusinfo.com.
website at http://www.focusinfo.com.