Focus Enhancements DR-HD100 Manuale Utente

Quickstart

28

Never disconnect the power or the FireWire cable during a 
recording. This will cause file corruption.

If power is lost during recording it is possible to repair the 
damaged file or files, refer “Repair Disk” on page 78 to and 
“Repair Clip DV Mode only” on page 79.

If the Counter does not increment while recording from the camera, it is 

an indication that there is no active connection between the DR-HD100 

and the camera. 

• Verify that the DR-HD100 1394 DV I/O and the camera 

connections are secure. It may be necessary to unplug and then 

reconnect them.

When a good connection is made, the Counter increments and 

recording starts.

If in DV Recorder mode, HD content will not record properly. A NTSC or 

PAL DV source records only on a matching NTSC or PAL unit.

When switching a camcorder from VTR to camera mode, there is a 
short (10-20 seconds) interval while the DR-HD100 re-establishes 
communications with the camcorder. If recording is started during this 
period, recording is delayed until the DR-HD100 finishes establishing 
communications with the camcorder.