Viking VDD5450SS Utilizzo E Cura

Pagina di 12
2
MODEL 
   WIDTH BLOWER 
(purchased 
separately)
VDD5300/CVDD5300   
 
30" W.   
VDVI600 Interior or VDVE900 Exterior
VDD5360/CVDD5360   
 
36" W.   
VDVI600 Interior or VDVE900 Exterior
VDD5450/CVDD5450   
 
45" W.   
VDVI600 Interior or VDVE900 Exterior, VDVE1200 Exterior
VDD5480/CVDD5480   
 
48" W.   
VDVI600 Interior or VDVE900 Exterior, VDVE1200 Exterior
WARNING
READ AND SAVE THESE INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY 
TO PERSONS, OBSERVE THE FOLLOWING:
1.  Use this unit only in the manner intended by the manufacturer. 
If you have questions, contact the manufacturer at the address 
or telephone number in the warranty.
2.  Before servicing or cleaning unit, switch power off at service 
panel and lock the service disconnecting means to prevent 
power from being switched on accidentally. When the service 
disconnecting means cannot be locked, securely fasten a 
prominent warning device, such as a tag, to the service panel.
3.  Installation work and electrical wiring must be done by a 
qualifi ed person(s) in accordance with all applicable codes 
and standards, including fi re-rated construction codes and  
standards.
4. Suffi cient air is needed for proper combustion and exhausting 
of gases through the fl ue (chimney) of fuel burning equip-
ment to prevent backdrafting. Follow the heating equipment 
manufacturer’s guideline and safety standards such as those 
published by the National Fire Protection Association (NFPA), 
and the American Society for Heating, Refrigeration and Air 
Conditioning Engineers (ASHRAE), and the local code authori-
ties.
5.  When cutting or drilling into wall or ceiling, do not damage 
electrical wiring and other hidden utilities.
6.  Ducted fans must always be vented to the outdoors.
7.  To reduce the risk of fi re, use only metal ductwork.
8.  Do not install this product with the activating switch directly 
behind a burner or element. Minimum distance between the 
switch and the edge of the burner should be 4 inches.
9. Loose-fi tting or hanging clothing should never be worn when 
operating this appliance. They may be ignited by burners/
elements on cooktop.
10. Children should not be left alone or unattended in the area 
where this appliance is in use.
11. This unit must be grounded.
TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:
a)  Never leave surface units unattended at high settings.  
 
Boilovers cause smoking and greasy spillovers that may  
 
ignite. Heat oils slowly on low or medium settings.
b)  Always turn hood ON when cooking at high heat or when 
cooking fl aming foods.
c)  Clean ventilating fans frequently. Grease should not be  
 
allowed to accumulate on fan or fi lter.
d)  Use proper pan size. Always use cookware appropriate  
 
for the size of the surface element.
TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT 
OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING
a
:
1.  SMOTHER FLAMES with a close-fi tting lid, cookie sheet, or 
metal tray, then turn off the burner. BE CAREFUL TO  
 
PREVENT BURNS. If the fl ames do not go out immedi- 
 
ately, EVACUATE AND CALL THE FIRE DEPARTMENT.
2.  NEVER PICK UP A FLAMING PAN - You may be burned.
3.  DO NOT USE WATER, including wet dishcloths or towels - a 
violent steam explosion will result.
4.  Use an extinguisher ONLY if:
 
A.  You know you have a Class ABC extinguisher, and you    
 
 
already know how to operate it.
      B.  The fi re is small and contained in the area where it  
 
  started.
      C.  The fi re department is being called.
      D.  You can fi ght the fi re with your back to an exit.
a
 Based on “Kitchen Firesafety Tips” published by NFPA.
CAUTION
1.  For indoor use only.
2.  For general ventilating use only. Do not use to exhaust haz-
ardous or explosive materials and vapors.
3.  To avoid motor bearing damage and noisy and/or unbalanced 
impellers, keep drywall spray, construction dust, etc. off power 
unit.
4. Clean fi lters and grease-laden surfaces frequently.
5.  Do not repair or replace any part of this appliance unless 
specifi cally recommended in this manual. All other servicing 
should be done by a qualifi ed technician.
6.  Please read specifi cation label on product for further informa-
tion and requirements.
7.  To reduce the risk of fi re and electric shock, install this down-
draft only with blower models shown below. Other blower 
models cannot be substituted. (Blowers sold separately).
 
Flex Blower Model VDVI600
 
Exterior Blower Models VDVE900, VDVE1200
!
INSTALLER: 
Save this manual for Electrical Inspector 
and Homeowner to use.