Verona VECTGMS304SS Istruzione Sull'Installazione

Pagina di 60
ENGLISH
Installation Manual
20
Proper adjustment will produce a stable, steady blue 
flame of minimum size. 
The final adjustment should be checked by turning 
knob from high to low several times without extin-
guishing the flame. 
This adjustment, at low setting, will automatically pro-
vide the proper flame size at medium setting. 
After Conversion steps have been completed, check 
the appearance of each burner's flame at the HI and 
LO settings, if the flames appear too large or too small 
review each step to make sure it was completed cor-
rectly. 
Electric gas ignition 
The gas burner use an electric ignition device located 
near each burner that by means a spark igniters en-
sure its surface light automatically. 
 
Figure 22.  Electric ignition 
 
See Use & Care manual for better explanation and 
its control. 
 
The Burner Flames 
Turn each burner on. Flames should be blue in color 
with no trace of yellow. The burner flames should not 
flutter or blow away from the burner The inner cone of 
the flame should be between 1/2" and 3/4" long. 
 
003
Figure 23.  Burner flames 
 
 
COOKTOP BURNER 
-1/2” to 3/4” 
NOTE: 
To obtain the correct minimum setting with LP gas, 
turn clockwise tightening the valve fully by the 
thin-blade screwdriver into the recess at centre of 
valve stem.