Verona VECTGMS304SS Istruzione Sull'Installazione

19

 

 

 

Light a match and hold the flame near the burner 

you want to light. Wooden matches work best. 

Push in and turn the control knob slowly.  

Be sure you are turning the correct knob for the 

burner you are lighting. 

 

NOTE:  

If the burner does not light within five seconds, turn 

the knob off and wait one minute before trying again. 

 

If you attempt to measure the inner cone of the 

flame, please use caution.  

Burns could result. 

 

This appliance is shipped from the factory with low 

and medium flame settings adjusted. 
If further adjustment is necessary, proceed as follows: 
Adjustment for Burners with one or two rings 

1.  Light burner and set control knob for low flame. 

2.  Remove control knob from valve stem. 

3.  Insert a slender, thin-blade screwdriver into the 

recess at centre of valve stem and engage blade 

with slot in adjusting screw. 

4.  Turn center stem adjusting screw to set flame 

size: 

•  clockwise to reduce 

•  counterclockwise to increase 

5.   Replace control knob when adjustment is com-

pleted.