Falcon F3400 Manuale Utente

www.rletech.com

66

970.484.6510

5

  EIA-232 Interface

Typing SC at the command prompt on the Main Menu displays the Main Configuration Menu 

that lists all items for system setup and configuration. This menu may be password protected. If 

it is, the password must be entered when the SC menu selection is made. To enter the password, 

type SC, press the space bar once, and then type the appropriate password. 

Table 5.2 Main Configuration Menu (SC) Commands

1displays the IP Configuration Menu.

2displays the Factory Menu. This menu provides a means to 

change the MAC address and erase the user configuration 

stored in Flash memory. This area is password protected. If 

you are familiar with MAC assignments and configuring the 

F3400/F1000, contact RLE Technologies for the password 

to this menu.
WARNING! Once you receive the password for this menu, 

you assume full responsibility for the system configuration 

and proper MAC addressing of the F3400/F1000.

3allows user configurations to be saved and reloaded onto 

other F3400/F1000s. Windows HyperTerminal application 

software may be used to perform the load/save functions.
Before the configuration can be loaded onto other F3400/

F1000s, it must be checked for accuracy. Blank spaces or 

unwanted characters, such as the “Press <enter> to 

download the file” text, may be saved into the beginning of 

the configuration file. Open the file in notepad and examine 

the first few lines. Delete any characters that were 

accidentally embedded into the file.

4 allows the user to password protect the configuration 

section of the F3400/F1000 Firmware. The password can be 

any combination of 7 numbers and/or characters. 

x exits the Main Configuration Menu and returns to the Main 

Menu.