Tekxon Technology X52 ユーザーズマニュアル

 

 

 

  

If your camera does not work properly, please check the following items. If the problem still 
exists please contact your dealer. 

Symptoms 

Cause and solution 

Cause:

Not enough light 

Error A 
Camera does not take photos 

Solution:

Change angle of camera to include more light 
or use automatic flash. 

Cause:

Weak batteries 

Error B 
Photos disappear from the LCD 
after a period 

Solution: Insert two fresh batteries. 

Cause:

The PC does not have enough free RAM. 

Error C 
Not all images can be 
downloaded to the PC 

Solution:

Close all other applications before 
downloading. If the problem persists, 
download the images one at a time to the PC 
and save them there before transferring the 
next image. 

Cause:

Camera shuts down automatically. 

Error D 
Camera switches off after 5 
minutes. LCD switches off. 

Solution: Restart camera. 

Cause:

The PC’s USB port is deactivated in the BIOS.

Error E 
When the camera is connected 
to the PC for the first time, no 
new hardware is found. 

Solution: Activate the port in the PC’s BIOS. 

Cause:

It is normal for the shutter speed to be slower 
in dark conditions. 

Error F 
The shot to shot time is longer 
when taking pictures in dark 
conditions. 

Solution:

Change the camera angle or improve the light 
conditions. 

Cause:

PC or camera is busy and there is no 
connection between the two. 

Error G 
The camera does not start after 
connection to the PC. The 
camera display lights up and 
LCD shows all symbols. 

Solution:

Disconnect the USB cable from the PC, check 
why the PC is busy and insert the cable again.

 

Note: This table contains possible causes of error. Some of these are normal phenomena.