Samsung SVD-4600 ユーザーズマニュアル

COLOR CCD CAMERA

User Guide

COLOR CCD CAMERA

User Guide

 

 

  

AGC (AUTO GAIN CONTROL) :  
The higher the gain level, the brighter the screen - but the higher the noise.

 

- OFF : Deactivates the AGC function.

 

- LOW : Allows automatic gain control from 5.3dB to 30dB.

 

- HIGH : Allows automatic gain control from 5.3dB to 42dB.

 

 

SENS-UP : 

     When it is night or dark, the camera automatically detects the light level and  

maintains a clear picture if this mode is activated.

    - OFF : Deactivates the SENS-UP function.
    - AUTO : Activates the SENS-UP function.

 

 

 RETURN : 

 

 Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.

• If you press the Function Setup switch in ‘AUTO’ mode, You can adjust brightness by

increasing or decreasing the shutter speed. (x2 ~ x256)

• Note that the higher the zoom level, the brighter the screen, but the more likely it is

that an after-image will appear.

• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation

when the zoom level is increased, this is normal.

Notes

Use the White Balance function to adjust the screen color.
1.  When the SETUP menu screen is displayed, select  ‘White Bal.’ by using the 

Function Setup switch so that the arrow indicates ‘White Bal.’ .

2. Select a desired mode using the Function Setup switch.

＊ Select one of the following 5 modes, as appropriate for your purpose.

 

 

ATW :  Select this when the color temperature is between 1,800ºK and 10,500ºK

 

 

 INDOOR :  Select this when the color temperature is between 4,500ºK and 8,500ºK.

 

 

OUTDOOR :  Select this when the color temperature is between 1,800ºK and 10,500ºK. 

(sodium light inclusion)

 

 

  AWC→SET :  To find the optimal setting for the current luminance environment in this 

mode, set the point the camera towards a sheet of white paper and press 
the Function Setup switch. If the environment changes, readjust it. 

 

 

 MANUAL :  Select this to fine-tune White Balance 

manually. Set White Balance first by using the 
ATW or AWC mode. After that switch to 
MANUAL mode, fine-tune the White Balance 
and then press the Function Setup switch.

• White Balance may not work properly under the following conditions. In this case

select the AWC mode.

 

❶

……

When the color temperature of environment surrounding the subject is out of the
control range (e.g. clear sky, or sunset)

 

2

…

When the ambient illumination of the subject is dim.

  3

…

 If the camera is directed towards a fluorescent light or is installed in a place 
where illumination changes dramatically, the White Balance operation may
become unstable.

Notes

MAIN SETUP

  1.LENS 

 DC    

  2.EXPOSURE   

  

  3.WHITE BAL 

 ATW

  4.BACKLIGHT 

 OFF