Agilent Technologies 42A ユーザーズマニュアル
4- 54
MegaZoom Concepts and Oscilloscope Operation
Recalling the factory default setup
Recalling the factory default setup
1 Press the
Save/Recall
key to display the Save/Recall menu.
2 Press
Default Setup
softkey.
This returns the oscilloscope to its factory default settings and places the
oscilloscope in a known operating condition. The major default settings are:
oscilloscope in a known operating condition. The major default settings are:
Horizontal main mode, 100 us/div scale, 0 s delay, center time reference
Vertical Channel 1 on, 5 V/div scale, dc coupling, 0 V position, probe factor
to 1.0 if an AutoProbe probe is not connected to the channel
to 1.0 if an AutoProbe probe is not connected to the channel
Trigger Edge trigger, Auto sweep mode, 0 V level, channel 1 source, dc
coupling, rising edge slope, 60 ns holdoff time
coupling, rising edge slope, 60 ns holdoff time
Display Vectors on, 20% grid intensity, infinite persistence off
Other Acquire mode normal, Run/Stop to Run, cursor measurements off