Lorex Technology L20WD800 Series ユーザーズマニュアル

Tips & Tricks - Useful System Information 

The following Tips & Tricks contain useful information about your System:

• Your default System Password is

 1234

. This password may be required when entering menus, 

reviewing Recorded Data, Archiving, PTZ, and for Remote Access. You can change this 
password in the System Menu.

• Make sure to set up your 

 prior to starting Recording. These settings are very 

important to maintain system data accuracy.

• The 

 option on the System does NOT display exactly what is shown on the Monitor 

screen - the spot out will show individual cameras in Sequence Mode, based on Menu Settings.

• 

 behaves in different ways, depending on MODE:

z

When in VGA Mode, the PIP will display the DVR Screen.

z

When in Component Mode, the PIP will display the DVR Screen.

z

When in Picture Frame Mode, the PIP will display the DVR Screen.

z

A PIP Screen will NOT be displayed when the Installation Guide Video is playing

z

When in DVR Mode, the REVERSE-PIP will display the Component, Video or VGA Input. This function 
could be used to watch a Movie or view your PC Screen while still monitoring the Live Video display.

• When setting up the System for Remote Access, it is very important to turn off the System, 

 to the system and to the Router, and then turn the 

System back on again. If the cable is connected while the System is on, it will not properly 
get Network Information from the Router.

• If you are experiencing difficulties accessing your System remotely, press the INFO Button 

on the Remote Control -or- the Enter Button on the Front Panel to display the System 
Information. The 

 - if it is, your system network 

settings are not correct. Please see the Network section of this manual for details.

• To listen to 

, make sure to maximize the selected channel to 

full screen. Audio will NOT play when playback is in split screen mode.

• When 

, it is important to note the color of your Highlight Box. 

When the highlight box is in GREEN, it indicates that the option is available for editing. When 
the highlight box is in ORANGE, it indicates that the option is in active editing mode, and the 
setting can be changed.

Orange Highlight - Indicates that 
the option is in active editing mode.

Green Highlight - Indicates that 
the option is available for editing. 
Once the option is highlighted, 
press the ENTER key to edit the 
option (highlights changes to 
Orange).