Lorex Technology L20WD800 Series ユーザーズマニュアル

Tips & Tricks - Useful System Information 

• Press the POWER button located on the front panel of the System to start the unit, or press 

the Power Button on the Remote Control.

• The System will perform a Hard Drive check

The unit will initially load to a split screen view, 
displaying all channels (if available). Empty 
channels will be displayed in Blue.

NOTE: If a new HARD DRIVE is detected, the 
system will prompt you to FORMAT the drive. If 
you do not choose to format the HARD DRIVE, the 
drive will not be detected by the system.

If you choose to FORMAT a drive in this way, the 
drive will no longer be readable by a regular PC 
without using the HARD DRIVE VIEWER software 
included on the CD provided with this unit. Please 
see the Appendices for details on Hard Drive format.

• Press the Power Button on the front panel or remote control for one second to turn off the 

monitor only. 

• The System will continue to record while the monitor is off.

• The LED indicators on the front of the System will remain ON.

• The monitor shutoff can be automatically set using the Screen Saver settings in the System 

Menu.

• Press and hold the Power Button on the front 

panel or remote control for three seconds 
to turn off the System, or select Shutdown 
from the Mouse Menu. Enter the Admin 
Password (1234 by default).

• Only the ADMIN can turn the unit ON/OFF.

• The System will NOT continue to record 

while the unit is off.

• The LED indicators on the front of the 

System will be OFF.