Lorex Technology L20WD800 Series ユーザーズマニュアル

Event / Sensor

• Smart Alarm - Sets the Smart Alarm ON/

OFF. An alarm occurs when errors are 
detected with the drive.

•  Check Interval - Sets the Hard Drive 

check interval (1~24 hrs). This setting 
allows the System to self-check the 
drive for any errors, and generate an 
Alarm if drive errors are found.

Configurations for any external alarm device 
(i.e. a Door or Window Sensor). 

•  Operation  - Sets the Alarm Sensor 

Connection Status (Enable / Disable) for 
an external alarm (i.e. Door or Window 
Sensors). Refer to the appendices for 
details.

• Type: Sets the Alarm Sensor type to N/

O (Normally Open) or N/C (Normally 
Closed).

The Event Sensor Setting controls contain:

HDD EVENT - Checks the Hard Drive for 
errors.

ALARM IN - Configuration settings for an 
external Alarm sensor (i.e. Door / Window 
Sensors).

ALARM OUT - Sends a signal to an external 
device when an alarm is detected.

BUZZER OUT - Turns the audible Buzzer 
ON/OFF for selected event types.

E-MAIL NOTIFICATION - Sends and E-Mail 
notification when a selected event occurs 
(based on User Configuration settings).