Lorex Technology L20WD800 Series ユーザーズマニュアル
47
Disk Management
EMAIL NOTIFICATION
Sends an email to the specified users when
the following events occur:
the following events occur:
• Notification - Sets the E-Mail notification
ON/OFF.
• HDD Event - A notification is sent if a
Hard Drive event is detected (set to ON/
OFF).
OFF).
• Notifications can be enabled for each
channel for:
z
Alarm
z
Video Loss
z
Motion can be selected
NOTE: Emails will be sent at 5 minute
intervals for the duration of the Event.
intervals for the duration of the Event.
Disk Management
• Record Time Limit - Setup for the
Recording Time Limit (OFF, 12h, 1~3
days, 1 week or 1 month).
days, 1 week or 1 month).
NOTE: The Record Time Limit refers to
the length of time data will be kept on the
drive. For example:
the length of time data will be kept on the
drive. For example:
The Record Time Limit is set to 1 week. The
System records data from the 1st of the month
through the 7th of the month. On the 8th of the
month, it will begin overwriting data (hour by hour)
that occurred on the 1st of the month. On the 9th of
the month, it will begin overwriting data that
occurred on the 2nd of the month. The
OVERWRITE feature must be ON for the Record
Time Limit feature to work.
System records data from the 1st of the month
through the 7th of the month. On the 8th of the
month, it will begin overwriting data (hour by hour)
that occurred on the 1st of the month. On the 9th of
the month, it will begin overwriting data that
occurred on the 2nd of the month. The
OVERWRITE feature must be ON for the Record
Time Limit feature to work.
• Overwrite - Determines how data is
maintained when the Hard Drive is full.:
z
ON - When Overwrite is set to ON, data
will be overwritten when the Hard Drive is full,
starting with the Oldest recording, or based
on the Record Time Limit settings.
starting with the Oldest recording, or based
on the Record Time Limit settings.
z
OFF - When Overwrite is set to OFF, the
data will not be overwritten when the Hard
Disk is Full. Recording will Stop, and the
Buzzer will be Activated.
Disk is Full. Recording will Stop, and the
Buzzer will be Activated.