Lexmark 248X ユーザーズマニュアル
57
Section 3: IBM Emulation Mode Printer Commands
•
ESC R (Set Default Tabulation Stops) and ESC B 0 will clear all vertical tab
stops.
stops.
• Set
the
tabulation
stops
in
ascending
order
(n1.....n64).
•
The last digit in the sequence must be a 0 to terminate the command.
Line Spacing
Set Line Spacing to 1/8 Inch
This command (ESC zero) sets the line spacing at 1/8 inch between each line,
which is 8 lines per inch (lpi).
which is 8 lines per inch (lpi).
Set Line Spacing to 7/72 Inch
This command sets the line spacing at 7/72 inch between each line, which
is 10.3 lpi.
is 10.3 lpi.
Activate Line Spacing for Text
This command activates the line spacing designated by the Set Line Spacing for
Text (ESC A) printer command.
Text (ESC A) printer command.
Format
ESC 0
Decimal
27
48
Hex
1B
30
Format
ESC 1
Decimal
27
49
Hex
1B
31
Format
ESC 2
Decimal
27
50
Hex
1B
32