Multi-Tech Systems FF200 ユーザーズマニュアル
Chapter 3: Server Installation
Multi-Tech Systems, Inc. FF200 FaxFinder Fax Server Admin User Guide
22
If it is a 192.168.2.x subnet, connect from the Administrative PC to the FaxFinder until the
FaxFinder’s IP address has been configured. Thereafter, connect the FaxFinder into the
network.
FaxFinder’s IP address has been configured. Thereafter, connect the FaxFinder into the
network.
Part B: Connecting to Telephony Service
The FF200’s fax modems can either be connected to a PBX (for use in PBX Routing Mode) or to a
POTS line (for use in POTS Mode).
POTS line (for use in POTS Mode).
Connection for
PBX Routing Mode
Connection for
POTS Mode
Plug one end of the phone
cable into the FaxFinder’s
LINE jack and the other into
an available Station Port on
the PBX.
cable into the FaxFinder’s
LINE jack and the other into
an available Station Port on
the PBX.
Plug one end of the
phone cable into the
FaxFinder’s LINE jack
and the other end into
your standard
telephone receptacle.
phone cable into the
FaxFinder’s LINE jack
and the other end into
your standard
telephone receptacle.
An RJ11-to-RJ11 cable is included with your FaxFinder.
PBX Routing Mode
POTS Mode
Line 2
Line 1
Ethernet
10/100
PO WER
5Vdc
Line 2
Line 1
Ethernet
10/100
POWER
5Vdc