Mitsubishi Electronics sw1dnd-iqwk-e ユーザーズマニュアル

3 - 24

Create a configuration by placing modules on the AnyWireASLINK Configuration window.

*1: The address of the slave module can be set automatically.

For the address auto-input, refer to the following manual.

GX Works2 Version 1 Operating Manual (Intelligent Function Module)

Select AnyWireASLINK master module  
(QJ51AW12AL) from the Module List 
window, and drag and drop it onto the 
Module Configuration window.

The AnyWireASLINK configuration 
diagram is created.

Double-click "AnyWireASLINK  
Configuration" on the Workspace 
window to open the AnyWireASLINK 
Configuration window.

Select the AnyWireASLINK slave 
module (B281PB-02U-CC20) from the 
Module List window, and drag and drop 
it onto the AnyWireASLINK 
Configuration window.

The slave module is added on the "list of 
modules", and the added slave module is  
displayed on the "device map area".

Set the address to the added slave 
module.

*1

For the general-purpose AnyWireASLINK 
module, set the I/O type, address, and 
number of occupied I/O points.

Drag & drop

Double click

Drag & drop