Mitsubishi Electronics sw1dnd-iqwk-e ユーザーズマニュアル
3 - 26
3.4.6 Creating Ethernet configuration diagrams
3 OPERATING PROCEDURE OF MELSOFT NAVIGATOR
iQ Works
3.4.6
Creating Ethernet configuration diagrams
Create a configuration by placing modules on the Ethernet Configuration window.
*1:
For the parameter processing of Ethernet devices, refer to the following manual.
iQ Sensor Solution Reference Manual
1.
Right-click "Ethernet Configuration" on
the Workspace window, and select
[Ethernet Configuration]
the Workspace window, and select
[Ethernet Configuration]
⇒ [Rename] in
the shortcut menu.
2.
Enter "Ethernet configuration A" to
change the Ethernet configuration
name.
change the Ethernet configuration
name.
3.
Select an Ethernet built-in CPU to be
set as an own station and IP address of
Ethernet module.
set as an own station and IP address of
Ethernet module.
4.
Double-click "Ethernet Configuration"
on the Workspace window to open the
Ethernet Configuration window.
on the Workspace window to open the
Ethernet Configuration window.
5.
Select an Ethernet device
*1
from the
Module List window, and drag and drop
it onto the Ethernet Configuration
window.
it onto the Ethernet Configuration
window.
Select
Double click
Drag & drop