Mercury Marine 899337001 ユーザーズマニュアル

OPERATION

Inflation

CAUTION

Do not use a compressed air source to fill air chambers. Over

inflation may result in damaged seams and or bulkheads. Seams

and or bulkheads ruptured from over inflation, are not covered

under the warranty.

IMPORTANT: Do not inflate or deflate one air chamber at a time.

When inflating or deflating, maintain a balanced air pressure

between air chambers to prevent stress or potential damage to the

inside diaphragms that separate the air chambers.

14778

a -

Valve stem

b -

Closed position

c -

Open position

d -

Valve cap

1. Unscrew the valve caps, turn a quarter of a turn

counterclockwise. Make sure the valve stems are in the closed

position. Push in on the valve stem and rotate to the closed

position.

2. Insert and lock the air pump fill adapter into the valve. Connect

the air pump hose to the fill adapter.

3. Starting at one of the air valves, inflate each air chamber in

turn inflating only a quarter of the way full. Repeat this

procedure to evenly fill the air chambers until the air chambers

are filled to the recommended air pressure of

0.24 bar (3.5 psi). Air pressure can be measured using air

gauge provided with the air pump or using an accessory air

pressure gauge.