Multi-Tech Systems MVP-2410 ユーザーズマニュアル

 

 

 

 

Tone Detection 
(Enable) 

Y/N 

After a specified tone (chosen 
from the Available Tones list) 
coming from the PBX is 
stopped, the FXS interface will 
send the ‘connect’ signal to the 
calling party.  

Available 
Tones (List)  

Busy Tone, Dial 
Tone, Reorder Tone 
Survivability Dial 
Tone, Unobtainable 
Tone 

List from which tones can be 
chosen to signal call answer. 

Answer Tones 
(List)   

Busy Tone, Dial 
Tone, Reorder Tone 
Survivability Dial 
Tone, Unobtainable 
Tone

 

Currently chosen call-answer 
supervision tone. 

Enable  
ISDN-PRI 

Y/N 

If digital connection is ISDN-
PRI type, this box should be 
checked. When ISDN is 
enabled, the “CAS Protocols” 
field is grayed out (ISDN has its 
own signaling method). 

Terminal/ 
Network 

either 
“Terminal” or 
“Network” 

When “Terminal” is selected, it 
indicates that the MultiVOIP should 
emulate the subscriber (terminal) 
side of the digital connection.  
When “Network” is selected, it 
indicates that the MultiVOIP should 
emulate the central office (network) 
side of the digital connection. 
Setting used for MultiVOIP must be 
opposite to the setting used in the 
PBX.  For example, if the PBX is set 
to “Terminal,” then the MultiVOIP 
must be set to “Network.”