Motorola accompli 008 ユーザーガイド
Getting Started 21
Press Enter to confirm your selection and enter the Phone Mode.
If the PIN is incorrect, the screen will show Invalid Pin. You can either:
Select PDA Mode to turn on the phone with PDA mode, or
Select Try Again to key in the PIN again.
! The SIM card will be automatically locked upon 3 consecutive keying of the wrong PIN. Please
refer to the "System Setup" to unlock the SIM card or contact your service provider.
If you have set up the phone number lock (refer to Security Setup under System), the screen will
prompt you to key in your number lock code to unlock the phone. Please key in the number lock
using the same method as keying in your PIN.
If the wrong number lock is entered, the screen will show Invalid Unlock Code and you have to
press Try Again. The phone will be turned off and locked automatically (even the PDA mode will
not work) if you keyed in the wrong number lock 3 consecutive times.
prompt you to key in your number lock code to unlock the phone. Please key in the number lock
using the same method as keying in your PIN.
If the wrong number lock is entered, the screen will show Invalid Unlock Code and you have to
press Try Again. The phone will be turned off and locked automatically (even the PDA mode will
not work) if you keyed in the wrong number lock 3 consecutive times.
A
Refer "System Setup" to pre-set the PIN and Phone Number Lock. If the correct PIN and Phone
Lock Code have been entered, the phone will then scan and register with the network. If the
phone is pre-set with Automatic Network Selection (see Network Settings under Network
Setup), the main menu will appear after scanning and selecting an available network. The
process of turning on a phone is now complete.
Lock Code have been entered, the phone will then scan and register with the network. If the
phone is pre-set with Automatic Network Selection (see Network Settings under Network
Setup), the main menu will appear after scanning and selecting an available network. The
process of turning on a phone is now complete.
If the phone is pre-set with Manual Network Selection, the screen will prompt you to select one
network form the list presented to you. You can either:
Press Cancel to select PDA mode.
network form the list presented to you. You can either:
Press Cancel to select PDA mode.
Press OK to select a network from the available networks.
12:26
Back
Available Networks
Network 1
Network 2
Network 3
Network 4
Network 5
Network 6
Your phone will try to register with the selected network. If this is successful, the phone will display
the network name and will return to the main menu.
The entire process of turning on the phone is now complete.
the network name and will return to the main menu.
The entire process of turning on the phone is now complete.
A
Depending on the different settings, you may not need to go through the entire process to turn
on the phone.
on the phone.
A
If the phone is turned on for the first time, it is recommended that you calibrate the screen. For
details, please see Calibrate Screen under Display Setup of Phone Setup.
details, please see Calibrate Screen under Display Setup of Phone Setup.