Marantz AV8003 ユーザーガイド

ENGLISH

 

 Select 

“2. SPKR SETUP” from the MAIN 

MENU.

 Select 

“MANUAL SETUP” with the 

3 or 4 

cursor buttons.

 Press the ENTER button to enter the 

selection.

          S P E A K E R   S I Z E
  T H X   S P K R         :  

Y E S

  S U B   W               :   Y E S
  F R O N T               :   S M A L L
  C E N T E R             :   S M A L L
  S U R R .               :   S M A L L
  S U R R . B             :   2 C H
  S U R R . B   S I Z E   :   S M A L L
  L P F / H P F           :   8 0 H z
  B A S S   M I X         :   M I X

R E T U R N               N E X T

 

E X I T

When setting the speaker size in the SPEAKER SIZE 
menu, use the guidelines below.
LARGE: 

The complete frequency range for the channel you 
are setting will be output from the speaker.

Frequencies of the channel you are setting that 
are lower than approx. 80 Hz will be output from 
the subwoofer.
If the SUB. W is set to “NONE” and the front 
speakers are set to “LARGE,” then the sound will 
be output from both the left and right speakers.

  Select each speaker with the 

3 or 4 cursor 

buttons.

  Set the size of each speaker with the 

1 or 2 

cursor buttons.

  After you complete this portion of the setup,  

move the cursor to “NEXT” with the 

3, 4, 1 and 

2 cursor buttons and press the ENTER button 
to go to the next page.

THX SPKR
If you are using a full THX speaker systems which are 
approved by THX Ltd: 
•  The front, center and surround speaker size 

should be “SMALL”.

•  The subwoofer should be “YES”.

•  LPF/HPF (the crossover frequency) should be 

“80Hz”.

You need to set the number of surround back 
speakers and the surround back speaker size should 
be “SMALL”.

•  When making settings for all channels manually, set 

THX SPKR to “NO.”

SUB W
YES:

Select when a subwoofer is connected.

Select when a subwoofer is not connected.

FRONT
LARGE: 

Select if the front speakers are large.

SMALL: 

Select if the front speakers are small.

• If “NO” is selected for the subwoofer setting, then 

this setting is fi xed at “LARGE”.

CENTER
NONE: 

Select if no center speaker is connected.

LARGE: 

Select if the center speaker is large.

SMALL: 

Select if the center speaker is small.

SURR.
NONE: 

Select if no surround left and right speakers are 
connected.

LARGE: 

Select if the surround left and right speakers are 
large.

SMALL: 

Select if the surround left and right speakers are 
small.

SURR. B
NONE: 

Select if no surround back left and right speakers 
are connected.

1CH: 

Select if one surround back speaker is connected.
In this case, the audio signal is emitted from the 
SURR BACK LEFT output terminal. 

2CH: 

Select if the surround back left and right speakers 
are connected.

Select if using the SURROUND BACK output 
terminal as Zone Speaker A.

Select if using the SURROUND BACK output 
terminal as Zone Speaker B.

• If “NONE” is selected for the SURR. setting, then 

this setting is fi xed to “NONE.”

SURR. BACK SIZE
LARGE:

Select if the surround back speakers are large.

Select if the surround back speakers are small.

• If “NONE” is selected for the SURR. setting, then 

this setting is not available.

LPF/HPF 
When you use a subwoofer, you can select the cutoff 
frequency for the small speakers used.  Select one of 
the crossover frequency levels according to the size 
of the small speakers connected.
60Hz  → 80Hz → 100Hz → 120Hz → 140Hz → 
160Hz → 180Hz

• If using small front speakers, set a slightly higher 

frequency. If using large front speakers, set a slightly 
lower frequency.

BASS MIX
•  The bass mix setting is only valid when “LARGE” 

is set for the front speakers and “YES” is set for the 
subwoofer during stereo playback.

  This setting has effect only during playback of 

PCM or analog stereo sources.

• When 

“BOTH” is selected, the low frequencies will 

be played through the main L&R speakers and the 
subwoofer. 

  In this playback mode, the low frequency range 

expands more uniformly throughout the room, but 
depending on the size and shape of the room, 
interference may result in a decrease of the actual 
volume of the low frequency range.

• By selecting “MIX”, the low frequencies will play 

through the main L&R only. This selection is 
preferred by THX.

• LFE signals during playback of Dolby Digital or 

DTS will be played through the subwoofer. 

  After you complete this portion of the setup,  

move the cursor to “NEXT” with the 

3, 4, 1 and 

2 cursor buttons and press the ENTER button to 
go to the next page.

      S P E A K E R   D I S T A N C E
U N I T               :      

m

F R O N T   L         :     3 . 0 5   m
C E N T E R           :     3 . 0 5   m
F R O N T   R         :     3 . 0 5   m
S U R R . R           :     3 . 0 5   m
S U R R . B   R       :     3 . 0 5   m
S U R R . B   L       :     3 . 0 5   m
S U R R . L           :     3 . 0 5   m
S U B   W             :     3 . 0 5   m

R E T U R N     B A C K   N E X T

 

E X I T

Use this menu to specify the distance of each 
speaker’s position from the listening position. The 
delay time is automatically calculated according to 
these distances.
Begin by determining the ideal or most commonly 
used seating position in the room.
This is important for the timing of the acoustics to 
create the proper sound space that the unit and 
today’s sound systems are able to produce. 

• For speakers for which you have selected “NONE”, 

the speaker confi guration sub-menu will not appear 
here. (There are several useful books and special 
DVD and LD’s available to guide you through proper 
home theater confi guration. If you are unsure, have 
your Marantz dealer perform the installation for you. 
They are trained professionals familiar with even 
the most sophisticated custom installations. Marantz 
recommends the www.cedia.org website for further 
information.)

 Select 

either 

m (meters) or ft (feet) for UNIT 

with the 

1 or 2 cursor buttons.

  Select each speaker with the 

3 or 4 cursor 

buttons.

  Set the distance for each speaker , press the 

1 

or 

2 cursor buttons.

FRONT L: 

Set the distance from the front left speaker to your 
normal listening position.

CENTER: 

Set the distance from the center speaker to your 
normal listening position.

FRONT R: 

Set the distance from the front right speaker to 
your normal listening position.

SURR. L: 

Set the distance from the surround left speaker to 
your normal listening position.

SURR. R: 

Set the distance from the surround right speaker to 
your normal listening position.

AV8003N.indb   29

AV8003N.indb   29

08.4.28   10:49:18 AM

08.4.28   10:49:18 AM